Free UK delivery over £250Family run since 1948Showrooms in Halifax & Bradford

Customer help

Installation and Safety

Harrison Lighting customer help · Updated 16 November 2026

Who should fit it

Ceiling lights, wall lights and outdoor lights are wired into your home's electrics, so we recommend a qualified, registered electrician fits them. In England and Wales, new circuits, and electrical work in bathrooms and many outdoor jobs, are notifiable under Part P of the Building Regulations; a registered electrician can self-certify the work. Plug-in lamps don't need an electrician.

Bathrooms

Bathrooms are split into zones around the bath and shower, and each zone needs a minimum IP rating. Check the IP rating on the product page and read our bathroom lighting guide before you choose.

Outdoors

Outdoor lights need an IP rating suited to where they go: IP44 is the usual minimum, and more exposed spots or lights near the ground need a higher rating. See our outdoor lighting guide.

Earthing and electrical class

Class 1 fittings must be connected to earth. Class 2 fittings are double insulated and don't need an earth. The electrical class is listed in each product's specifications.

Weight and fixing

Heavy chandeliers and large pendants need a fixing point that can take their weight, not just a plastic ceiling rose. The weight is listed on the product page; tell your electrician before installation day.

Bulbs

Use the bulb cap the fitting is made for and never exceed its maximum wattage. LED bulbs use far less power and run cooler. If you'll use a dimmer switch, choose dimmable bulbs and a dimmer suited to LED. Our bulbs and caps guide explains the caps.

Questions people ask

Can I fit a ceiling light myself?

We recommend a qualified electrician. Some work, such as in bathrooms, is notifiable under Part P in England and Wales.

What IP rating do I need in a bathroom?

It depends on the zone. Our bathroom lighting guide sets out each zone and rating.