Ansell iCages are one of the best fire rated downlights on the market, primarily because they do not have a "can" covering the back of the fitting allowing the heat produced by the lamp to escape. This helps to prolong the life of the lamp, especially LEDs which are particularly vulnerable to heat.
The Ansell Icages are suitable with normal lamps or with 4w LED lamps
If you want to put your own GU10 lamp or our LED GU10 lamp in the fitting you will need to remove 2 screws from the GU10 base which is a simple procedure taking around 10 seconds and requiring a small cross-head screwdriver.
- Dedicated low energy downlight with spring-loaded GU10 Lamp Holder
- 7, 9, 11 and 14w CFL or 7W LED GU10 Lamp
- Extra large terminals for fast loop in, loop out wiring
- Twist lock lamp retaining ring for ease of lamp replacement
- Ultra-slim bezel profile
- Will accept GU10 CFL and LED lamps
- Available in white, chrome, brass
- Open design of fitting allows lamp to breathe providing optimum lamp life
- Ingenious design
- 85mm Hole Cut Out, but will cover up to a 100mm hole.
During extensive fire testing iCage demonstrated that the cage construction radiated reduced levels of heat into the ceiling void. This culminated in significant lower joist temperatures, thus maintaining their durability and strength.
With the construction of differentials of each ceiling, it is imperative that Fire Rated Downlights pass all three tests. It is not credible to assume that because a fitting passes the 90-minute test, that it will pass the 30-minute and 60-minute tests.
With the complexity of the various applications and statutory enforcement of part B, it can be difficult to assess the needs of an installation. iCage takes away this problem as it is fully tested in 30, 60 and 90 minute ceilings and can be specified for all applications.
This patented and registered design, incorporates a unique intumescent reaction allowing a totally new concept as a cage constructed luminaire.
In comparison to existing fire rated enclosed can designs, iCage and its components operate in a cooler environment and are not reliant on forward heat lamps to provide lower operating temperatures.
iCage offers the installer and specifier a wide range of lamp options, including Part L compliant florescent up to 14w and 7W LED, as well as the traditional halogen lamp options
|Select by Room Type||Bathroom, Bedroom, Children, Conservatory, Dining Room, Garage, Hallway, Indoor, Kitchen, Living Room, Office, Outdoor/Garden, Snooker, Stairway|
|Select by style||Traditional, Contemporary, Modern, Ultra Modern|
|Select by Finish||No|
|Number of lights||1 Single Light|
|Bulbs included with product||No|
|Min Height (cm)||No|
|Max Height (cm)||No|
|Max Width (cm)||No|
|Max Depth (cm)||No|
Shipping and Returns
Shipping: All items kept in stock at our Halifax head office will usually be sent out the same day if ordered before our daily cut off time of 2pm. Orders placed that are fullfilled by our suppliers are also dispatched the same day if ordered before 2pm (dependant on supplier and stock levels). Please note some items are hand made or built to order - these items can take up to 2 weeks
to arrive. Items can also be sent to your local branch free of charge - Please select branch while on the checkout page.
Backorders: Items ordered not in stock will be despatched as soon as we receive stock and usually sent out the same day.
Online returns Policy: You may return new, unfitted or unused products within fourteen (14) days of delivery for a full refund of the cost of the goods, or an exchange if preferred. Goods must be in their intact original box and in a resaleable condition. You must cover the cost of returning these goods to our premises in Halifax. We strongly advise the use of shipping company with tracking facility.
Our bespoke or customised light fitting items ("Made to order") are not covered by our standard returns policy. These are 'made to measure' light fittings that are made to your individual requirements and cannot be resold by us. We will work with you and do our utmost to make sure you are 100% satisfied with your order before your light is made, but regret we are unable to offer refunds on bespoke fittings after the initial 24 hour cooling off period. Our production and delivery time for bespoke items is 2-3 weeks. (None of the above affects your statutory rights where goods are faulty or not as described).