Details
Hartland Antique Brass Push On/Off Dimmer 3 gang 2 way 400W max 40W min. Standard Insert will be Antique Brass.
Attributes
|
| Model |
79 P3X400 |
| Primary Range |
Hartland |
| Insrt |
P3X400 |
| Plate material |
Metal |
| Size (double) height |
85mm |
| Size (double) width |
144mm |
| Size (double) depth |
5mm |
| Box fixing hole centres |
120.6mm |
| Minimum wall box depth |
35mm |
| Wattage |
400W per gang |
| Current rating |
1.66 Amps per gang |
| Voltage |
220/250V AC |
| Max load |
400W resistive per gang |
| Mains Frequency |
50Hz |
| IP rating |
IP2XD |
| Switched Poles |
Single |
| Terminal Capacity 1 |
2 x 1mm2 |
| Terminal Capacity 2 |
2 x 1.5mm2 |
| Earth Terminal Capacity 1 |
5 x 1mm2 |
| Earth Terminal Capacity 2 |
4 x 1.5mm2 |
| Earth Terminal Capacity 3 |
3 x 2.5mm2 |
| Earth Terminal Capacity 4 |
1 x 4mm2 Multi-Strand |
| Earth Terminal Capacity 5 |
1 x 6mm2 |
| Product Class 1 |
Face plate must be earthed |
| Ambient Operating Temperature |
-5° to +40°C |
| Recommended Location |
Indoor use only |
| Max installation Altitude |
2000m |
| BS EN ISO Standard |
BS EN 60669-2-1 |
| Additional Notes : |
* Denotes LEADING EDGE TECHNOLOGY DIMMERS. Resistive dimmers are suitable for control of incandescent lamps. When dimming GU10 type mains halogen or linear halogen lamps the dimmers need to be derated by 25%. When used for dimming low voltage electronic halogen transformers it must be noted that the dimmer controls the primary side of the transformer. It is important that you seek advice from the transformer manufacturer that their transformers are suitable to be dimmed by a leading edge type dimmer and that it is compatible with a Hamilton manufactured resistive leading edge dimmer. Inductive dimmers are suitable for dimming Laminated or Toroidal type low voltage halogen transformers only. |
| Patents And Trademarks |
Trade Mark No. 2344778 |
